Posts Tagged ‘US’

Embalming: The How and Why

To Embalm means just that – em (to cause) balm (spices). Embalming has been around since almost the beginning of time. Jacob’s (Israel’s) embalming is recorded in Genesis Ch 50. It became popular in the United States during the Civil War because soldiers could be sent home instead of being buried in the battlefield. Abraham Lincoln was the first US President to be embalmed and his body was taken on ‘tour’ over 1650 miles. This popularized embalming as people could see the state his body was in even days after his death.

Embalming has not always been as we know it today. It has ranged from simply anointing the body to the complex rituals of wealthy Egyptians. Today’s process is known as arterial embalming. Thomas Holmes is known as the Father of American Embalming and introduced the process of arterial embalming. The blood of the vascular system is replaced with embalming fluid which contains dyes, humectants, surfactants, and small amounts of formalin — the liquid form of the gaseous formaldehyde. Some chemical companies have replaced formalin, which has its drawbacks, with gluteraldehyde.

Here is a very simplified rundown of the process:

* 1. The facial features such as mouth and eyes are positioned
* 2. A major artery (usually the Carotid first) is raised above the skin
* 3. An accompanying vein (ie the Jugular) is raised
* 4. Fluid is injected (pumped) into the artery and the vein is incised to allow drainage
* 5. Fluid distribution is observed and other arteries are injected if needed
* 6. Incision are sutured

During this process the hair and body are washed and the fingernails are cleaned, etc.

After arterial embalming is completed, cavity embalming begins. A long tube known as a trocar is inserted into the Thoracic (chest) and Abdominopelvic Cavities and any fluids or gases that may be present are aspirated or removed via suction. Then a strong concentrated fluid is distributed throughout the cavities. There have been times in history that only cavity embalming was done and times when only arterial embalming was done.

The benefits of embalming are numerous: It puts color back into the skin, it slows decomposition, it disinfects, and it restores a more natural appearance. Though there is no federal law that requires embalming, most (if not all) funeral homes require it in the case of a public viewing. The real value of embalming however, is unseen. I could write pages and pages about the importance of viewing the body of a friend or family member.

“Dr. Erich Lindemann, a pioneer in the study of grief management:postulates that avoidance of the dead body is always done at the psychological peril of the aggrieved, and that this avoidance may appear at first to be consoling in the initial phase of acute grief. But in truth [this] is just an illusion. In time, the necessity to view the body becomes a major issue in postbereavement care.” Mayer, Robert. Embalming. McGraw-Hill Medical, 2006. pp 7-8. Print.

Author, poet, and funeral director, Thomas Lynch says: “remembering him the way he was:begins by denying with the way he is. When someone dies, it is not them we fear seeing, it is them dead. We fear that seeing will be believing.” Lynch, Thomas. Bodies in Motion and at Rest. W. W. Norton & Company, 2001. Print.

Embalming can cost anywhere from $250 to $800 and can be more if the person was autopsied. Surprisingly, most funeral homes lose money on the embalming process. The general public does not seem to understand the true value of embalming, and since embalming is not required for certain services such as cremation and direct burial without public viewing, funeral homes fear that raising the price to much better cover the cost will steer people away from the option.

FAQ: Are the Organs Removed During Embalming?

No, Embalming utilizes the circulatory system and is done with as small of incisions as possible. A pathologist will remove organs during an autopsy, but they are kept with the body and buried/cremated.

Accompanying images and more information can be seen at funeraryramblings.blogspot.com

This article may be republished only with permission

Allowing All USA Poker Players

Playing poker online is not the same as playing in person, as one can not observe body language, which is a great feature if you want to win. However, there are ways you can read the action of other poker players if you know what to look for in a game of online poker.
The first [...]

Alternative energy development

Japan is a densely populated country, and that makes the Japanese market more difficult compared with other markets. If we utilize the possibilities of near-shore installations or even offshore installations in the future, that will give us the possibility of continued use of wind energy. If we go offshore, it’s more expensive because the construction of foundations is expensive. But often the wind is stronger offshore, and that can offset the higher costs. We’re getting more and more competitive with our equipment. The price—if you measure it per kilowatt-hour produced—is going lower, due to the fact that turbines are getting more efficient. So we’re creating increased interest in wind energy. If you compare it to other renewable energy sources, wind is by far the most competitive today. If we’re able to utilize sites close to the sea or at sea with good wind machines, then the price per kilowatt-hour is competitive against other sources of energy, go the words of Svend Sigaard, who happens to be president and CEO of the world’s largest wind turbine maker, Vestas wind systems out of Denmark. Vestas is heavily involved in investments of capital into helping Japan expand its wind turbine power generating capacity. It is seeking to get offshore installations put into place in a nation that it says is ready for the fruits of investment into alternative energy research and development.

The Japanese know that they cannot become subservient to the energy supply dictates of foreign nations—World War II taught them that, as the US decimated their oil supply lines and crippled their military machine. They need to produce energy of their own, and they being an isolated island nation with few natural resources that are conducive to energy production as it is defined now are very open to foreign investment and foreign development as well as the prospect of technological innovation that can make them independent. Allowing corporations such as Vestas to get the nation running on more wind-produced energy is a step in the right direction for the Japanese people.

The production of energy through what is known as microhydoelectric power plants has also been catching on in Japan. Japan has a myriad rivers and mountain streams, and these are ideally suited places for the putting up of microhydroelectric power plants, which are defined by the New Energy and Industrial Technology Development Organization as power plants run by water which have a maximum output of 100 kilowatts or less. By comparison, “minihydroelectric” power plants can put out up to 1000 kilowatts of electrical energy.

In Japan, the small-scaled mini- and micro-hydroelectric power plants have been regarded for a considerable time as being suitable for creating electricity in mountainous regions, but they have through refinement come to be regarded as excellent for Japanese cities as well. Kawasaki City Waterworks, Japan Natural Energy Company, and Tokyo Electric Power Company have all been involved in the development of small-scale hydroelectric power plants within Japanese cities.

www.globalwarming-prevention.com
Alternative energy development

I am a 33 year old Internet Marketing Consultant and Content writer from India.

Finding Casino to Play Online Machine

There are so many US online casinos, especially in Las Vegas, but if your house is far from LA, will be useless, because surely you do not want to go to Las Vegas. There is another way of playing games of chance without the need to go to Las Vegas. You can play casino games [...]

History of Magnets and Their Uses

Magnets have been in use at least as far back as the 4th Century BC and likely even earlier. A Chinese tome from that era titled “Book of the Devil Valley Master” details the magnetic properties found in certain types of rock. It wasn’t much later that Chinese sailors were taking advantage of magnets by developing compasses.

Ancient Uses for Magnets

As knowledge of magnets and their properties spread around the world, some of the applications proved quite unusual. Magnets were at one point believed to restore youthful properties to skin, so much so that Cleopatra is rumored to have slept on a bed of magnetized rock. In the middle ages, various practices arose centered around magnets; some were merely superstitious and some have been found to have merit to this day.

The Chinese continued to find practical applications for magnets, including within the realm of medicine. In ancient China, heated magnets were often placed along the spine in order to align the spirit, and this belief is still practiced by some to this day. There is even currently work being done examining the curative effect that magnets and magnetic pulses can have on brain function, pain reception, blood properties, and nerve damage.

Magnets in Today’s World

The use of magnets in modern medicine continues as magnets are sometimes used in reflexology and even play a large part in modern medical technology such as the magnetoencephalography devices used to monitor brain activity.

Today, magnets are commonly used in thousands of mechanized applications. Electric motors and generators are entirely based around magnets. In such devices, magnets surrounded by electrical coils are moved by the current being passed through the coils, generating energy. Variations on this electro-magnet technology can be found in dozens of common modern devices and appliances, including cell phones, doorbells, computers, video game systems, and others.

And it’s not just the tiny magnets. Massive magnets play an integral part in construction and industrial applications. Large truck-mounted magnets are commonly used to clear construction sites of debris. Giant crane-mounted magnets are responsible for heavy lifting at construction and shipping sites. And large industrial magnets are installed in factory conveyor belt systems to separate materials.

Ironically, the “ancient” technology of magnets is responsible for one of the most futuristic of modern conveyances-the magnet train. As popularized in Japan, the magnet train relies on a field created between two magnets’ north poles (one on the train itself and one along the tracks) to lift the train, causing it to “hover” on a cushion of air. This in turn allows the train to travel safely at incredibly high speeds while providing an uncannily smooth ride. This technology, known as MAGLEV (magnetic levitation) is now making its way to America.

In fact, there are various plans in the works to build a MAGLEV train connecting large US metropolitan areas. This MAGLEV train will reach speeds up to 300 miles per hour, delivering passengers in a fraction of time compared to the same trip by car. As concern grows over energy efficiency and environmental responsibility in transportation, MAGLEV trains truly look poised to be the transportation of the future.

And that’s not to mention the fun side of magnets. Refrigerator magnets have a long tradition as an entertaining and colorful method for posting up everything from important reminders to children’s artwork. And magnets also have a long history in toys; they can be found in everything from magnetic construction sets to “Magna-Doodle” art devices to wall-crawling Spider-Man action figures.

Magnets have even made their way into the arts. “Magnetic poetry” kits are a popular way to compose random poems by arranging magnetized words against a metal surface. Some professional artists, such as Sachiko Kodoma, have even taken to incorporating magnets into their gallery exhibits. The popular X-Men series of movies and comic books even feature a character, Magneto, who wields power over gravitational forces.

So magnets are truly a unique commodity. They are an ancient discovery that is still utilized in applications as diverse as brain wave analysis, construction, high-speed mass transit, navigation, decoration, and even poetry composition. You can’t say that for too many other rocks.

Magnets.com is a leading supplier of <a href="http://www.magnets.com/">magnets</a> online. From refrigerator magnets to business cards we can help you with virtual any promotional need you may have.Visit online today.